PCI-E USB3.1 GEN2

PCI-E USB3.1 GEN2 MINI 20PIN Expansion Card

Product specifications:
1. Product Name: PCI-E USB3.1 GEN2 MINI 20PIN Expansion Card
2. Master IC: ASM3142
3. Expansion interface: 2* MINI20P (USB3.1 GEN2)
4. Socket type: PCI-E 4X
5. Support slot: PCI-E 4X/8X/16X
6. Theoretical rate: 10Gbps
System Requirements:
1. Must hold the motherboard of PCI-E 4X/8X/16X expansion card slot
2. Support Windows Vista/7/8.1/10 & MAC with USB support
Hardware installation:
1. Turn off your computer and other connected devices
2. Disconnect the computer from the power supply
3. Remove the computer cover
4. Insert the PCIE card into the corresponding slot
5. Plug in the PCIE card and screw it
Device connection:
There are two MINI 20PIN connectors on the PCIE card board that support the connection of two peripherals with internal MINI 20PIN(USB3.1 GEN2)
 1. Insert the PCIE card device into the computer and connect the SATA power supply
 2. Connect one end of the MINI 20PIN cable to the peripheral device
 3. Connect the other end of the MINI 20PIN cable to the PCIE card.
 4. Connect to 2 devices using this PCIE card
 5. Re-install the computer back cover and connect the computer to the power source.
Install in an existing system: 
Install drivers in Windows Vista/7/8.1/10 
1. Run the file from the CD driver to find the file ASMUSB Host/setup.exe
2. Enter the welcome screen and click "Next" to confirm the installation.
3. Check "I accept the terms in the license agreement" and click Next to confirm the license conditions.
4. Click "Finish"
5. After the installation is complete, restart your computer and click "Yes".